2000 Series Pulse Height Analyzer

Particles Plus Pulse Height Analyzer

2000 Series Pulse Height Analyzer

for Optical Particle Counters

 

The Particles Plus® Pulse Height Analyzer provides a sophisticated pulse processing engine to reliably calibrate non-Pulse Height Analyzer based optical particle counters. This instrument can process pulses on two separate gain channels and accepts a wide input voltage range on both channels.

The Pulse Height Analyzer also interfaces directly with Particles Plus optical particle sensors supplying both power and allowing control of the sensors on-board laser.

Note: Airflow management must be managed by the optical particle counter or external vacuum pump and critical orifice.

Up to 250,000 samples per second
14 bits per channel
2 analog input channels (Hi/Lo gain for Particles Plus® instruments)
Adjustable sample limits and binning
Built-in peak detectors for each channel
Separate trigger thresholds for each channels
Particle Plus® Pulse Height Analyzer software included
Number of Channels2 analog input channels (Hi/Lo gain for Particles Plus instruments)
Sample SpeedUp to 250,000 samples per second
Sample Resolution14 bits per channel
Sample BinsAdjustable sample limits and binning
Sample Voltage Range0 to 5 volts on each channel
Sample DetectionBuilt-in peak detectors for each channel
Sample TriggerSeparate trigger thresholds for each channels
Self-test OptionOutput signals available for Pulse Height Analyzer self-test
Supply Voltage9 – 15 VDC
SoftwareParticle Plus® Pulse Height Analyzer software included
CommunicationUSB mini-B Particle Plus® Pulse Height Analyzer software
AccessoriesOperating manual on USB flash drive, power supply, cable harness, and USB cable Type A to Mini-B
Dimensions (W x L x H)2.85” x 4.22” x 1.11” (72.39 x 107.18 x 28.19 mm)
Weight0.2 lb. (100 grams)
Operating Conditions41° to 104°F (5° to 40°C) / 20% to 95% non-condensing
Storage Conditions32° to 122°F (0° to 50°C) / Up to 98% non-condensing

Digaram Pulse Height Analyzer