2510-2 Remote Airborne Particle Counter

Particles Plus Remote Particle Counters

 

Model 2510-2

0.5 – 25.0 µm @ 1.0 CFM

The 2510-2 particle counter provides a range of particle size measurement from 0.5 to 25.0 μm at a flow rate of 1.0 CFM (28.3 LPM). These sensors allow for efficient particle counting with specifications that exceed the ISO 21501-4 and JIS B9921 calibration standards.

These sensors have 2 fixed particle size channels and are equipped with an integral critical orifice and flow sensor to provide a stable flow rate from an external vacuum source. Integration into a building automation or facility monitoring system is easy via isolated RS-485 Modbus communication.

Measures 0.5 to 25.0 μm (up to 2 size channels)
1.0 CFM (28.3 LPM) flow rate
Long life laser diode technology
Measures up to 4 channels of simultaneous data
Particle concentrations up to 1,500,000 Particles/ft3 @ 10% coincidence loss
Internal critical orifice
Connect using Modbus RTU/ASCII over isolated RS-485
Complies with ISO 21501-4 and JIS B9921 standards
Easy to clean and wipe down with minimal particle traps
Versatile mounting options
User configurable alarm light
LED Indicators
Seamless integration into a facility monitoring system
Lightweight stainless steel enclosure
2 year limited warranty. Extended warranties available.
Model2510-2
Size Range0.5 to 25.0 μm
Size ChannelsFactory calibrated at 0.5, 5.0 μm
Number of Channels2
Counting Efficiency50% @ 0.5 μm; 100% for particles > 0.75 μm per JIS
Flow Rate1.0 CFM (28.3 LPM)
Concentration Limits1,500,000 Particles/ft3 @ 10% coincidence loss
Light SourceLong life laser diode
Zero Count< 1 count /15 minutes (< 1 particles /15ft3). No fault count subtraction.
CalibrationNIST traceable
Vacuum RequirementsExternal vacuum > 15" (38.1cm) of Hg
AirflowInternally monitored
AlarmUser configurable alarm light
Communication ModesMODBUS™ RTU or ASCII outputs (over isolated RS-485)
StandardsISO 21501-4 and JIS B9921
Instrument CalibrationRecommended minimum once per year
External SurfaceStainless steel
Dimensions (L x W x H)3.59” x 1.83” x 5.01” (9.1 cm x 4.6 cm x 12.7 cm) including probes and connectors
Weight1.65 lb. (0.75 kg)
AccessoriesWiring Connector, operating manual on USB flash drive
Optional AccessoriesPower Supply, Remote Mounting Bracket, Isokinetic Probe, Filter Assembly, and Sample & Vacuum Tubing
Sample Time1 second to 18 hours
Power9 - 24 VDC (< 2.5 watts)
Operating Conditions41° to 104°F (5° to 40°C) / 20% to 95% non-condensing
Storage Conditions32° to 122°F (0° to 50°C) / Up to 98% non-condensing
Warranty2 year limited warranty. Extended warranties available.

Remote Mounting Bracket 2000/9000 Series
Part Number: AS-99081

Filter Assembly 1.0 CFM
(28.3 LPM)
Part Number: AS-99041A

Power Supply 12VDC @ 1Amp
100-240 VAC 50/60Hz
Part Number: EE-80148

Isoprobe 1/4" Barbed 1.0 CFM
(28.3 LPM) Stainless Steell
Part Number: PS-12144

Tubing 3/8" OD (1/4" ID) Urethane per foot
Part Number: AS-99019

Tubing 3/8" OD (1/4" ID) Bev-A-
Line XX per foot
Part Number: AS-99037

USB to RS-485 Adapter
Part Number: AS-99088A

2000/2000P Series
User Manual and PPD-9K Software (USB Key)
Part Number: MN-24028

Series with Pump
User Manual (Printed)
Part Number: MN-24027P

Series Validation
Manual
Part Number: MN-24033